We've got 51 products for you

Active filters

Exhaust Hoods

Lambro HVAC Logo

Lambro is a manufacturer of Exhaust Hoods, which are crucial components in kitchen, bathroom, and dryer ventilation systems. Our HVAC products, also referred to as hood vents, roof vents, caps, or under eve vents, play a vital role in these systems.

When searching for exhaust hoods, vent hoods, or hood vents on Google, consumers may come across information about the consumer product, range hoods, which are installed above cooking ranges and designed to remove grease and odors via an exhaust system.

However, in the HVAC industry, the term “exhaust hoods” has a different meaning. It refers to the end component of a ventilation system that allows air to exit through an exterior wall or roof. These hoods are commonly known as wall/roof caps, roof/wall vents, dryer vent hoods, or simply as vent hoods or exhaust hoods.

Exhaust Hoods Examples

Common types of exhaust hoods.

ROOF & WALL EXHAUST HOOD CAPS for a BATHROOM EXHAUST SYSTEM

Exhaust Hoods Bathroom Wall or Roof Hoods Illustration

The bathroom exhaust hood and its ducts play a vital role in a home’s ventilation system. In older properties like rental apartments, building codes may not require a bathroom fan if there is a window in the bathroom, which means that a bathroom exhaust fan may not be considered a necessary feature unless the bathroom is undergoing renovation. However, in new homes, an exhaust fan in the bathroom is a must-have.

A bathroom exhaust fan helps in keeping the bathroom dry and fresh by removing moisture vapors generated from bathing and other activities. This prevents serious damage to drywall, wallpaper, window coverings, cabinetry, and mold issues. Models for exhaust fans are available for ceiling, wall, or window mounting, but they all must vent outside through an exterior wall or roof. The ceiling or wall mounted exhaust fan must vent to the outside through an exterior wall or roof. This helps to keep the bathroom odor-free and maintain proper ventilation.

The most popular choice for bathroom exhaust fan venting is through an exterior wall, followed by a roof vent installation. Exhaust hood installation at the soffit, the underside of a roof’s overhang, is less common. It is important to check with local building codes before opting for a soffit installation as not all municipalities permit this venting option.

Lambro offers a variety bathroom exhaust hood venting products that are suitable for either wall or ceiling bathroom fan installations. These products are available in white, grey, and brown plastic or aluminum and can fit ducts with diameters ranging from 3″ to 6″. Our wall exhaust hoods ensure proper ventilation and help to keep the bathroom dry and fresh.

Exhaust Vents Wall Caps Bathroom

Depending upon the model, features include:

  • Opening/closing damper prevents outside elements from entering the vent
  • Some have dampers that are spring loaded to keep damper closed when not in use
  • Some have screens or removable screens to prevents birds from nesting inside of vent
  • UV inhibitor is used to help prevent the premature fading of vent

EXAMPLES:

3″ Aluminum Preferred Hood Vent – Item #543
Pack Quantity: 12 / Package Type: Bulk Pack
3″ White Plastic Louvered Vent – Item #290W – 11” tail pipe Item #290W
Pack Quantity: 12 / Package Type: Bulk Pack
3″ Brown Plastic Preferred Hood Vent – Item #222B
Pack Quantity: 12 / Package Type: Bulk Pack

4″ Aluminum Preferred Hood Vent – Item #344
Pack Quantity: 10 / Package Type: Bulk Pack
4″ White Plastic Low Profile Premium Vent Hood – Item #1472W
Pack Quantity: 4 / Package Type: Retail Sleeve

5″ Aluminum Wall Cap w/ screen – Item #345S
Pack Quantity: 1 / Package Type: Single Pack

6″ Gray Plastic Wall Cap – Item #351GR
Pack Quantity: 1 / Package Type: Retail Carton
6″ Aluminum Wall Cap – Item #346S
Pack Quantity: 1 / Package Type: Single Pack

WALL KITS with EXHAUST HOODS for the BATHROOM

Lambro offers a variety of bathroom ventilation kits with aluminum and plastic hoods making your shopping easier by including all the necessary parts for a complete bathroom ventilation system. No need to separately select a duct, exhaust hood cap, clamps, connector (if necessary), and trim plate. Our kits are designed primarily for venting directly through an exterior wall.

Exhaust Hoods Wall Caps Kit Bathroom With Parts

Bathroom Wall Cap Vent Kits w/ Parts

According to the International Residential Code (IRC), there are no specific requirements for the length and diameter of bathroom ducts. Bathroom ducts can be made of metal, plastic, or aluminum flex ducts, and their interior surfaces can be either ridged or smooth unlike dryer ducts which must have smooth interior surfaces and be constructed from minimum 0.016-inch-thick rigid metal ducts. The IRC section M1502 Clothes Dryer Exhaust sets these guidelines.

Note that a clothes dryer duct can be used for the exhaust duct of a bathroom or shower fan, but not the other way around.

Typical kit features include:

  • Opening/closing damper prevents outside elements from entering the vent
  • Removable screen
  • UV inhibitor used to help prevent the premature fading of outside exhaust hood
  • Include either hood or cap vents with tail pipe, a trim plate and some type of clamp

EXAMPLES:
4″ X 5′ UL 2158A Transition Duct Hood Vent Kit w/ Flexible laminated foil duct – Item #1365B
Although this kit is highly recommended for clothes dryer venting installations, it is also acceptable for bathroom venting.
Pack Quantity: 10 / Package Type: Retail Polybag
4″ X 5′ Vinyl Duct Louvered Vent Kit in Brown – Item #264B
Pack Quantity: 10 / Package Type: Individual Box
4″ X 5′ Vinyl Duct Preferred Hood Vent Kit – Item #205W
Pack Quantity: 10 / Package Type: Retail Box

4″ X 8′ UL 2158A Semi-Rigid Transition Duct Preferred Hood Vent Kit – Item #316WUL
Although this kit is highly recommended for clothes dryer venting installations, it is also acceptable for bathroom venting.
Pack Quantity:1 / Package Type: Retail Carton

Lambro HVAC Logo

KITCHEN ROOF & WALL EXHAUST HOODS

Exhaust Hoods Kitchen Wall Roof Caps Illustration

A roof or wall exhaust hood is an important part of a ducted range hood installation.

The roof or wall exhaust vent / cap should match the diameter of your ductwork. Lambro offers kitchen roof and wall exhaust hoods in plastic with diameters ranging from 6” to 8” and aluminum roof exhaust hoods that fits ducts up to 10″ round or ducts 3 ¼” x 10″.

WALL EXHAUST HOODS for the KITCHEN

Exterior wall termination holes can be concealed with ease using Lambro’s wall exhaust hoods, also known as wall caps. These hoods provide protection against dirt, debris, and animals, ensuring long-lasting performance while maintaining the aesthetic appeal of your home. Regardless of the type of exhaust system you have, ensure a professional finish with a wall exhaust hood from Lambro.

Lambro offers wall exhaust vents with a hooded design. They are made from durable materials such as plastic in white or grey, aluminum, and galvalume. To ensure a smooth installation process, each product page for Lambro’s wall exhaust hoods/caps comes with a detailed spec sheet and comprehensive instructions.

Exhaust Hoods Kitchen Wall Aluminum

Aluminum 6” to 8’ Round and 3 1/4″ X 10″ Exhaust Hoods

LAMBRO ALUMINUM 6” TO 8” ROUND EXHAUST HOOD WALL CAPS:

  • Opening/closing damper prevents outside elements from entering the vent
  • Damper is spring loaded to keep damper closed when not in use
  • Back-draft damper helps prevent undesirable air backflow
  • Some aluminum wall caps have screens to prevent birds from nesting inside the vent
  • Available in sizes from 6” – 8” round

EXAMPLES:
6″ Aluminum Wall Cap – Item #346 No screen
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Aluminum Wall Cap – Item #347S w/ screen
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Aluminum Wall Cap – Item #348S No screen
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO 3 1/4″ X 10″ EXHAUST HOOD WALL CAPS FOR RIGID DUCTWORK:
Depending upon the model, features may include:

  • The 3 1/4″ X 10″ size is equivalent to a 6″ round.
  • Available in aluminum and plastic (white or grey)
  • Spec sheet available on product page
  • Opening/closing damper prevents outside elements from entering the hood
  • Damper is spring loaded to keep damper closed when not in use
  • Plastic wall caps have a UV inhibitor is used to help prevent the premature fading of vent

EXAMPLES:
3 1/4″ X 10″ Aluminum Wall Cap w/ screen – Item #106S
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Gray Plastic Wall Cap – no screen – Item #1170G
Pack Quantity:6 / Package Type: Bulk Pack

LAMBRO PLASTIC 6” to 8’ ROUND EXHAUST HOOD WALL CAPS

Depending upon the model, features for Lambro’s plastic exhaust hoods include:

  • Opening/closing damper prevents outside elements from entering the hood
  • Damper is spring loaded to keep damper closed when not in use
  • Back-draft damper helps prevent undesirable air backflow
  • Have screens to prevent birds from nesting inside the vent
  • Available in sizes from 6” – 8” round or 3 1/4″ X 10″
  • Colors: white or grey

EXAMPLE:
7″ White Plastic Wall Cap w/ screen – Item #352W
Pack Quantity:1 / Package Type: Single Pack

ROOF EXHAUST HOODS for the KITCHEN

A roof cap, also known as a roof exhaust hood cap, is used to cap the end of ducts that run vertically. Both roof and wall caps serve the purpose of keeping dirt, debris, and unwanted creatures out of your ducts, as well as preventing back drafting. It is important to ensure a tight seal around the exhaust hood cap by properly sealing the exterior opening with caulking.

LAMBRO PLASTIC ROOF EXHAUST HOOD CAPS:

  • For Shingle Roof Installations Only
  • Opening/closing damper prevents outside elements from entering the hood
  • Screen prevents birds from nesting inside of vent
  • Designed to prevent leaks with proper installation
  • Spec sheets and installation instruction are available on each product page

Exhaust Hoods Roof Caps Plastic

EXAMPLES:
6″ Black Plastic Roof Cap – Item #356
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Black Plastic Roof Cap – Item #357
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Black Plastic Roof Cap – Item #358
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO ALUMINUM ROOF EXHAUST HOOD CAPS:

  • Opening/closing damper prevents outside elements from entering the hood
  • Screen prevents birds from nesting inside of vent
  • Designed to prevent leaks with proper installation
  • Spec Sheet available on each product page

Exhaust Hoods Roof Caps Aluminum

EXAMPLES:
Aluminum Roof Cap – Item #116
Fits ducts up to 7″ round
Pack Quantity:1 / Retail Package Type: Single Pack
Aluminum Roof Cap – Item #107
Fits ducts up to 10″ round & 3 ¼” x 10″
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO WALL & ROOF KITS for KITCHEN or BATHROOM

Shopping for a complete kitchen or bathroom ventilation system just got easier with Lambro’s all-in-one exhaust vent kits. Our kits simplify the process by providing everything needed to vent through an exterior wall or roof. You won’t have to worry about separately selecting a duct, an exhaust hood cap, clamps, or trim plate, as these components are all included in the kit. With Lambro’s comprehensive kitchen or bathroom vent kits, you’ll have everything you need to get the job done.

Exhaust Hoods Kits Wall Roof

7″ Galvanized Wall Vent Kit

  • Can be used to vent over-the-range microwaves
  • Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
  • Opening/closing flaps prevents outside elements from entering the vent
  • UV inhibitor is used to help prevent the premature fading of vent
  • Pack Quantity: 1 | Package Type: Retail Carton

7″ Galvanized Roof Vent Kit

  • For Shingle Roof Installations Only
  • Can be used to vent over-the-range microwaves
  • Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
  • Opening/closing damper prevents outside elements from entering the hood
  • prevents birds from nesting inside of vent
  • Designed to prevent leaks with proper installation
  • Pack Quantity: 1 | Package Type: Retail Carton

Lambro HVAC Logo

LAMBRO EXHAUST HOODS for a DRYER

Exhaust Hoods Bathroom Wall Roof

To ensure proper ventilation and prevent potential problems, it is important to follow the installation instructions carefully when choosing a dryer vent solution. Moreover, dryer exhaust hoods serve a crucial function in safeguarding your home from fire hazards. To ensure that your dryer vent / exhaust hood is installed correctly and compliant with regulations, it is advisable to adhere to the following guidelines:

  1. Familiarize yourself with local dryer vent codes. These codes may vary by location, but there are generally accepted standards that most jurisdictions follow.
  2. Ensure that your dryer vent meets or surpasses these requirements. This will help you ensure that your dryer vent is properly installed and up to code, keeping your home safe from fire hazards.
  3. The National Fire Protection Association (NFPA) code 2158 states that clothes dryers must be vented to the outside of the building. The International Residential Code (IRC) M1401.4 requires that clothes dryers be exhausted to the outdoors through an approved duct. The duct material shall be rigid metal, semi-rigid metal duct, rigid nonmetallic duct or other type listed in the dryer manufacturer’s installation instructions.

DRYER WALL EXHAUST HOODS

Exhaust Hoods Dryer Wall Aluminum Plastic Options

Features for dryer wall exhaust hoods include (depending upon the model)

  • Opening/closing damper prevents outside elements from entering the hood
  • Removable screen
  • UV inhibitor is used to help prevent the premature fading of vent

EXAMPLES:
4″ White Plastic Low Profile Premium Vent Hood – Item #1472W
Pack Quantity: 1 / Pack Quantity: 4 / Retail Package Type: Retail Sleeve
4″ White Plastic Louvered Vent – Item #267WKD
Pack Quantity: 18 / Retail Package Type: Bulk Pack
4″ Aluminum Preferred Hood Vent with tail pipe – Item #344S
Pack Quantity:10 / Retail Package Type: Ret Retail Sleeve

DRYER WALL KITS with EXHAUST HOODS

Exhaust Hoods Dryer Wall Kits

Clothes dryer venting kits are a user-friendly solution that provide all the essential components required for a hassle-free installation by either a consumer or contractor. The exhaust hood vents or wall caps in these kits come in a choice of aluminum or plastic, with plastic options available in white or brown.

The ducts included in these kits have a diameter of 4 inches and are either semi-rigid aluminum or flexible laminated foil, available in lengths of 5 or 8 feet. Many kits also come equipped with galvanized tension clamps for added security.

In each kit, detailed installation instructions are included for your convenience. Additionally, some products even come with spec sheets and videos to assist with the installation process.

Highly recommended for clothes dryer venting installations, Lambro offers more than 17 dryer wall vent kits.

Typical features include:

  • Opening/closing flaps prevents outside elements from entering the vent
  • Flexible laminated foil design for easier installation or a flexible semi-rigid aluminum triple-lock design
  • Ideal for both gas and electric dryer installations
  • UV inhibitor is used to help prevent the premature fading of vent
  • Metal Worm Gear Clamps or Galvanized Tension Clamps

EXAMPLES:
4″ X 5′ UL 2158A Transition Duct Dryer Hood Vent Kit – Item #1365W
Ideal for both gas and electric dryer installations
Pack Quantity: 10 / Package Type: Retail Polybag
4″ X 5′ UL 2158A – Transition Duct Vent Kit – Item #1369B
Highly recommended for clothes dryer venting installations.
Quantity: 12 / Package Type: Poly Bag
4″ X 8′ UL 2158A Dryer Duct Louvered Vent Kit – Item #1359W
Highly recommended for clothes dryer venting installations.
Pack Quantity: 12 / Package Type: Retail Box
4″ X 8′ UL 2158A Transition Dryer Duct Hood Vent Kit w/ Galvanized Tension Clamps – Item #1363W
Pack Quantity: 12 / Package Type: Retail Box
4″ X 8′ UL 2158A Semi-Rigid Transition Duct Louvered Vent Kit – Item #313WUL
Pack Quantity: 1 / Package Type: Retail Carton

Lambro HVAC Logo

With the extensive product line of exhaust hoods and exhaust hoods kits for both roof and wall installations offered by Lambro, distributors, wholesalers and retailers are sure to find the best options for their customers.

Give us a call at (800) 645-2860 or fill out our Contact Us form.

Cart

Back to Top