We've got 14 products for you

EXHAUST VENTS

Lambro produces exhaust vents, which are crucial parts of kitchen, bathroom, and dryer HVAC ventilation systems. Our exhaust vent products may be listed as roof vents, hood vents, under eve vents, or caps on our site.

When searching for “exhaust hoods,” “hood vents,” or “vent hoods” on Google, one may come across pages about kitchen range hoods, which are hood canopies that remove smoke and odors from cooking ranges.

However, these terms also have a different meaning in regards to ventilation systems for kitchens, dryers, and bathrooms, referring to the final component of the venting system that allows air to escape through an exterior wall or roof. These types of exhaust vents are often referred to as wall/roof caps, roof/wall vents, dryer vent hoods, or simply as a vent hood or hood vent.

Exhaust Vents Examples

Common types of exhaust vents.

Lambro HVAC Logo

LAMBRO VENTS with Opening/Closing Louvers

Exhaust Vents Louvers Illustration

Our plastic louvered vents with opening/closing flaps are used for exhaust applications. They include louvers to prevents outside elements from entering the vent. They do not have a molded screen. They are available in white or brown plastic with a 6” diameter and in white in a 7” or 8” diameter size.

Exhaust vents

Features include:

· Opening/closing flaps prevents outside elements from entering the vent
· UV inhibitor is used to help prevent the premature fading of vent

Remember that the size vent you select represents the size diameter of the duct to which it will attached.

6″ White Plastic Louvered Vent – Item #361W
Pack Quantity: 12 / Retail Package Type: Bulk Pack
6″ Brown Plastic Louvered Vent
Pack Quantity: 12 / Retail Package Type: Bulk Pack
6″ White Plastic Louvered Vent – Item #361WTP with 11″ Tail Pipe
Pack Quantity: 5 / Retail Package Type: Bulk Pack

Also available in:

7″ White Plastic Louvered Vent – Item # 362W
8″ White Plastic Louvered Vent

Lambro HVAC Logo

KITCHEN ROOF & WALL CAPS EXHAUST VENTS

Exhaust Vents Kitchen Wall Roof Caps Illustration

A roof or wall exhaust vent cap is an important part of a ducted range hood installation.

The roof or wall exhaust vent / cap should match the diameter of your ductwork.

Lambro offers kitchen roof and wall exhaust vent caps in plastic with diameters ranging from 6” to 8” and aluminum roof exhaust vent caps that fits ducts up to 10″ round or ducts 3 ¼” x 10″.

Our roof exhaust vent caps are appropriate for range hoods with the following CFM ratings.

· 0-400 CFM: minimum duct size of 4”, recommended duct size of 6”
· 401-600 CFM: minimum duct size of 6”, recommended duct size of 8”
· 601-900 CFM: minimum duct size of 7”, recommended duct size of 8”-10”
· 901-1200 CFM: minimum duct size of 8”, recommended duct size of 10”-12”
· 1200+ CFM: minimum 10” diameter duct, recommended duct size of 12”

WALL EXHAUST VENT CAPS

Wall exhaust vent caps are one of the most convenient ways to hide the termination holes from exhaust systems in exterior walls. A well-made wall exhaust vent cap will guard against dirt, debris, and animals for many years, yet not interfere with the exterior aesthetics of a home. Regardless of what kind of air exhaust application you have, finish your exhaust system professionally by purchasing a wall exhaust vent from Lambro.

Lambro’s wall exhaust vent are hooded. They are constructed from plastic in white or grey, aluminum, and galvalume. Most Lambro product pages for their wall exhaust vent cap have both a spec sheet and installation instructions.

LAMBRO ALUMINUM 6” TO 8” ROUND EXHAUST WALL CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Back-draft damper helps prevent undesirable air backflow
· Some aluminum wall caps have screens (S) to prevent birds from nesting inside the vent
· Available in sizes from 6” – 8” round

Aluminum Exhaust Vents / Wall Caps

Exhaust Vents Kitchen Wall Caps Aluminum

6″ Aluminum Wall Cap – Item #3460 No screen
Pack Quantity: 6 / Retail Package Type: Bulk Pack
7″ Aluminum Wall Cap – Item #347
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Aluminum Wall Cap – Item #348S w/ screen
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO PLASTIC 6” TO 8” ROUND EXHAUST VENT WALL CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Back-draft damper helps prevent undesirable air backflow
· Have screens to prevent birds from nesting inside the vent
· Available in sizes from 6” – 8” round
· Colors: white or grey
· UV inhibitor is used to help prevent the premature fading of vent

Plastic Exhaust Vents / Wall Caps

Exhaust Vents Kitchen Wall Cap Plastic

EXAMPLE:

6″ Gray Plastic Wall Cap Item #351GR w/ screen
Pack Quantity:1 / Package Type: Retail Carton

LAMBRO 3 1/4″ X 10″ EXHAUST VENT WALL CAPS FOR RIGID DUCTWORK:

· The 3 1/4″ X 10″ size is equivalent to a 6″ round.
· Available in aluminum and plastic (white or grey)
· Spec sheet available on product page
· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Plastic wall caps have a UV inhibitor is used to help prevent the premature fading of vent

Aluminum 3 ¼” x 10” Exhaust Vents / Wall Caps

Exhaust Vents Kitchen Wall Cap

3 1/4″ X 10″ Aluminum Wall Cap – Item #1060 spec sheet
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Aluminum Wall Cap – Item #106S w/ screen
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Gray Plastic Wall Cap – Item #1170G no screen
Pack Quantity:6 / Package Type: Bulk Pack

Lambro HVAC Logo

ROOF EXHAUST VENT CAPS

A roof cap, sometimes referred to as a roof exhaust vent cap, is used to cap vertically run ducting. Both roof or wall caps keep dirt, debris, and animals out of your duct. They also help prevents back drafting. Use caulking to seal the exterior opening around the exhaust vent cap for a tight seal.

LAMBRO PLASTIC ROOF EXHAUST VENT CAPS:

· For Shingle Roof Installations Only
· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Spec sheets and installation instruction are available on each product page

Exhaust Vents Roof Caps Plastic

EXAMPLES:

6″ Black Plastic Roof Cap
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Black Plastic Roof Cap
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Black Plastic Roof Cap
Pack Quantity:1 / Retail Package Type: Single Pack

GALVALUME ROOF VENT

DryerJack – Low Profile Roof Exhaust Vent

Exhaust Vents Dryerjack Illustration

Galvalume is comprised of a steel sheet dipped in a coating of 55% aluminum, 43.4% zinc, and 1.6% silicone.

DryerJack – Low Profile Roof Vent for dryers
Made of Galvalume
Pack Quantity:1

LAMBRO ALUMINUM ROOF CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Spec Sheet available on each product page

Exhaust Vents Roof Caps Aluminum

EXAMPLES:

Aluminum Roof Cap – Item #116
Fits ducts up to 7″ round
Pack Quantity:1 / Retail Package Type: Single Pack
Aluminum Roof Cap – Item #107
Fits ducts up to 10″ round & 3 ¼” x 10″
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO WALL & ROOF KITS for KITCHENS

Lambro kitchen vents kits for exhausting via an exterior wall or through the roof makes shopping easier by including all the necessary parts for a complete ventilation system. With our kits there is no need to select separately a duct, exhaust vent, clamps, and trim plate.

Exhaust Vents Kitchen Kits Wall Roof

· Can be used to vent over-the-range microwaves
· Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
· Opening/closing flaps prevents outside elements from entering the vent
· UV inhibitor is used to help prevent the premature fading of vent
· Pack Quantity: 1 | Package Type: Retail Carton

7″ Galvanized Roof Vent Kit

· For Shingle Roof Installations Only
· Can be used to vent over-the-range microwaves
· Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Pack Quantity: 1 | Package Type: Retail Carton

Lambro HVAC Logo

WALL & ROOF EXHAUST VENT CAPS for a BATHROOM EXHAUST SYSTEM

Exhaust Vents Bathroom Wall or Roof Venting Illustration

Plastic & Aluminum Roof and Wall Exhaust Vents

Exhaust Vents Bathroom Roof

Plastic & Aluminum ROOF Exhaust Vents

Bathroom exhaust vent wall and roof caps along with the necessary ducts are a critical part of a home’s ventilation system. Yet having a bathroom intake and / or exhaust fan is often overlooked, particularly in you live in an older rental, condo or coop apartment where building codes do not require it as long as you have a window in the bathroom. For new homes, an exhaust fan in the bathrooms is a must.

By removing moisture vapors generated from bathing and other activities, as well as keeping the bathroom fresh, a bathroom exhaust fan can help prevent serious damage to drywall, wallpaper, window coverings, and cabinetry as well as mold issues. A bathroom exhaust fan keeps the bathroom dry and odor-free. Models are available that mount in the ceiling, a wall or the window, but all must vent outside via an exterior wall or through the roof.

The most common option for bathroom exhaust fan venting is to an exterior wall. The second most common is the roof vent installation. Bathroom exhaust fan venting installation at the soffit, the underside of a roof’s overhang, is less often utilized. Check with your local building code regarding a soffit installation because not all municipalities allow this venting option.

Plastic or Aluminum WALL Exhaust Vents

Exhaust Vents Bathroom Fans Ceiling Wall Installation

Most of Lambro’s bathroom venting products work well for either a wall or ceiling bathroom fan installation. Available in white, grey, and brown plastic or aluminum, these wall exhaust vents fit ducts with diameters of 3”, 4”, 5” and 6”.

Features include (depending upon model):

· Opening/closing damper prevents outside elements from entering the vent
· Some have dampers that are spring loaded to keep damper closed when not in use
· Some have screens or removable screens to prevents birds from nesting inside of vent
· UV inhibitor is used to help prevent the premature fading of vent
· Roof Cap is for Shingle Roof Installations Only

3″ White Plastic Preferred Hood Vent – Item #1470W
Pack Quantity: 12 / Package Type: Bulk Pack
3″ Brown Plastic Preferred Hood Vent – Item #222B
Pack Quantity: 12 / Package Type: Bulk Pack
3″ Aluminum Preferred Hood Vent – Item #343 – 11” tail pipe
Pack Quantity: 10 / Package Type: Bulk Pack
3″ Or 4″ Black Plastic Roof Cap – Item #3540
Pack Quantity: 10 / Package Type: Bulk Pack

4″ Aluminum Preferred Hood Vent – Item #544
Pack Quantity: 12 / Package Type: Bulk Pack
4″ White Plastic Low Profile Premium Vent Hood
Pack Quantity: 4 / Package Type: Retail Sleeve
4″ White Plastic Preferred Hood Vent – Item #224W – 11” tail pipe
Pack Quantity: 12 / Package Type: Bulk Pack
4″ Or 6″ White Plastic Under Eave Vent w/ removable screen
Pack Quantity: 8 / Package Type: Retail Box

5″ Aluminum Wall Cap – Item #345S w/ screen
Pack Quantity: 1 / Package Type: Single Pack
5″ Black Plastic Roof Cap Item #355
Pack Quantity: 1 / Package Type: Single Pack

6″ Gray Plastic Wall Cap
Pack Quantity: 18 / Package Type: Bulk Pack
6″ Aluminum Wall Cap – Item #346
Pack Quantity: 1 / Package Type: Single Pack
6″ Black Plastic Roof Vent– Item #356
Pack Quantity: 1 / Package Type: Single Pack

LAMBRO BATHROOM WALL KITS include EXHAUST VENTS

Lambro offers a variety of bathroom ventilation kits with aluminum and plastic caps making your shopping easier by including all the necessary parts for a complete bathroom ventilation system. No need to separately select a duct, exhaust vent cap, clamps, connector (if necessary), and trim plate. Our kits are designed primarily for venting directly through an exterior wall.

Exhaust Vents Wall Caps Kit Bathroom With Parts

Bathroom Wall Cap Vent Kits w/ Parts

Unlike dryer ducts, bathroom ducts kits interior surfaces of bathroom ducts can be ridged or smooth because metal, plastic, and aluminum flex ducts are permitted for bathroom venting, Smooth surfaces aren’t not required for the bathroom ducts as they are for dryer ducts. Pooling

of condensation is more of a concern. For bathroom vents, there are no explicit length and diameter requirements in the IRC (International Residential Code). FYI: Clothes dryer ducts can be used for a bathroom / shower fan’s exhaust duct, but not necessarily vice versa. Residential Code (IRC) SECTION M1502 CLOTHES DRYER EXHAUST guidelines state that “Exhaust ducts shall be constructed of minimum 0.016-inch-thick (0.4 mm) rigid metal ducts, having smooth interior surfaces, with joints running in the direction of air flow. Exhaust ducts shall not be connected with sheet-metal screws or fastening means which extend into the duct“. In other words: flexible, ribbed vents are not allowed for dryer ducts.

Typical kit features include:

· Opening/closing damper prevents outside elements from entering the vent
· Removable screen
· UV inhibitor used to help prevent the premature fading of outside exhaust vent
· Include either hood or cap vents or louvered vents with tail pipe, a trim plate and some type of clamp

EXAMPLES:

4″ X 5′ UL 2158A Transition Duct Hood Vent Kit w/ Flexible laminated foil duct
Although this kit is highly recommended for clothes dryer venting installations, it is also acceptable for bathroom venting.
Pack Quantity: 10 / Package Type: Retail Polybag
4″ X 5′ Vinyl Duct Preferred Hood Vent Kit – Item #205B in Brown
Pack Quantity: 10 / Package Type: Retail Box
4″ X 5′ Vinyl Duct Preferred Hood Vent Kit – Item #205W
Pack Quantity: 10 / Package Type: Retail Box

4″ X 8′ UL 2158A Semi-Rigid Transition Duct Preferred Hood Vent Kit
Although this kit is highly recommended for clothes dryer venting installations, it is also acceptable for bathroom venting.
Pack Quantity:1 / Package Type: Retail Carton
4″ X 8′ LamaFlex Duct Roof Kit – Item #402L
Pack Quantity:1 / Package Type: Retail Carton

Lambro HVAC Logo

With the extensive product line of exhaust vents and vents kits offered by Lambro, distributors, wholesalers and retailers are sure to find the best options for their customers. Give us a call at (800) 645-2860 or fill out our Contact Us form.

Cart

Back to Top