We've got 18 products for you

Active filters

Kitchen Roof & Wall Caps

Lambro is a leading manufacturer of kitchen roof and wall caps. Wall & roof caps are often referred to as wall or roof vents. But, be aware that not all vents are wall or roof caps.

See our kitchen vents page for our stationary fixed louvered vents and our opening/closing flap vents.

Wall & roof caps are an important part of a ventilation system whether it is for your kitchen, range hood, bathroom, or clothes dryer. Kitchen roof and wall caps are typically used for air exhaust applications.

Kitchen Wall Cap Products

Lambro sells its kitchen roof and wall caps through a network of dealers, distributors, wholesalers and retailers in the United States.

Our products are made from high-quality materials and backed by a limited warranty. And all of our kitchen roof and wall caps products meet or exceed local and national building codes. If you are a dealer or contractor contact Lambro. We will be happy to help you find the right product for your kitchen roof and wall caps needs!

If you are a consumer and are installing a kitchen ventilation system, contact your local big box, hardware store or e commerce site today for Lambro kitchen roof and wall caps!

To find a Lambro dealer near, please go to https://www.lambro.net/where-to-buy/

Kitchen Venting Wall Roof Caps

Once you have decided upon which type of kitchen exhaust duct you are going to use with your kitchen range hood or exhaust fan, you will need to select and then install a wall or roof cap for the air to exit your kitchen.

The roof or wall cap should match the diameter of your ductwork.

Lambro offers kitchen roof and wall caps with diameters from 6” to 8” in plastic and aluminum roof caps that fits duct up to 10″ round & 3 ¼” x 10″.

Our roof caps are appropriate for range hoods with the following CFM ratings.

· 0-400 CFM: minimum duct size of 4”, recommended duct size of 6”
· 401-600 CFM: minimum duct size of 6”, recommended duct size of 8”
· 601-900 CFM: minimum duct size of 7”, recommended duct size of 8”-10”
· 901-1200 CFM: minimum duct size of 8”, recommended duct size of 10”-12”
· 1200+ CFM: minimum 10” diameter duct, recommended duct size of 12”

WALL CAPS

Wall caps, frequently referred to as wall vents are one of the most convenient ways to hide the termination holes from exhaust systems in exterior walls. A well-made wall cap does not interfere with the aesthetics of a home, yet will guard against dirt, debris, and animals for many years. Regardless of what kind of air exhaust application you have, finish professionally by purchasing a wall or roof cap from Lambro.

Lambro’s wall caps are hooded and their construction ranges from plastic in white or grey to aluminum. Most Lambro product pages for wall caps have both a spec sheet and installation instructions.

LAMBRO ALUMINUM 6” TO 8” ROUND WALL CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Back-draft damper helps prevent undesirable air backflow
· Some aluminum wall caps have screens to prevent birds from nesting inside the vent
· Available in sizes from 6” – 8” round

Kitchen Wall Cap Aluminum

6″ Aluminum Wall Cap – Item #346 No screen
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Aluminum Wall Cap – Item #347S w/ screen
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Aluminum Wall Cap – Item #348S No screen
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO PLASTIC 6” TO 8” ROUND WALL CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Back-draft damper helps prevent undesirable air backflow
· Have screens to prevent birds from nesting inside the vent
· Available in sizes from 6” – 8” round
· Colors: white or grey

Kitchen Wall Cap Plastic

EXAMPLE:

6″ Gray Plastic Wall Cap w/ screen #351GR
UV inhibitor is used to help prevent the premature fading of vent
Pack Quantity:18 / Package Type: Bulk Pack

LAMBRO 3 1/4″ X 10″ WALL CAPS FOR RIGID DUCTWORK:

· The 3 1/4″ X 10″ size is equivalent to a 6″ round.
· Available in aluminum and plastic (white or grey)
· Spec sheet available on product page
· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Plastic wall caps have a UV inhibitor is used to help prevent the premature fading of vent

Kitchen Wall Cap

3 1/4″ X 10″ Aluminum Wall Cap – Item #1060 spec sheet
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Aluminum Wall Cap – Item – #106S w/ screen
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Gray Plastic Wall Cap – Item #1170G no screen
Pack Quantity:6 / Package Type: Bulk Pack

ROOF CAPS

A roof cap is used to cap vertically run ducting, while a wall cap seals ducting that vents out an exterior wall. Both roof or wall caps keep dirt, debris, and animals out of your duct. They also help prevents back drafting. Use caulking to seal the exterior opening around the cap for a tight seal.

LAMBRO PLASTIC ROOF CAPS:

· For Shingle Roof Installations Only
· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Spec sheets and installation instruction are available on each product page

Kitchen Roof Caps Plastic

EXAMPLES:

6″ Black Plastic Roof Cap #356
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Black Plastic Roof Cap #357
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Black Plastic Roof Cap #358
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO ALUMINUM ROOF CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Spec Sheet available on each product page

Kitchen Roof Caps Aluminum

EXAMPLES:

Aluminum Roof Cap – Item #116
Fits ducts up to 7″ round
Pack Quantity:1 / Retail Package Type: Single Pack
Aluminum Roof Cap – Item #107
Fits ducts up to 10″ round & 3 ¼” x 10″
Pack Quantity:1 / Retail Package Type: Single Pack

LAMBRO KITCHEN VENT KITS

Lambro kitchen vents kits for the wall or roof makes shopping easier by including all the necessary parts for a complete kitchen ventilation system. With our kits there is no need to separately select a duct, roof or wall cap, clamps, and trim plate.

Kitchen Vents Wall Roof Caps

7″ Galvanized Wall Vent Kit

· Can be used to vent over-the-range microwaves
· Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
· Opening/closing flaps prevents outside elements from entering the vent
· UV inhibitor is used to help prevent the premature fading of vent
· Pack Quantity: 1 | Package Type: Retail Carton

7″ Galvanized Roof Vent Kit

· For Shingle Roof Installations Only
· Can be used to vent over-the-range microwaves
· Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Pack Quantity: 1 | Package Type: Retail Carton

Lambro carries wall and roof caps for the kitchen and range hoods made from aluminum and plastic that allow for years of durable reliability and great looks while venting a kitchen and range hood effectively. Our roof and wall caps are designed to prevent air from coming in from the outside, yet allow easy flow of air from the kitchen to be vented outside where the moisture or smell won’t affect living quarters.

With the variety of wall and roof caps that Lambro offers, distributors, wholesalers and retailers are sure to find the best options for their customers. Give us a call at (800) 645-2860 or fill out our Contact Us form.

Cart

Back to Top