Showing all 39 results

Kitchen Vents

 

Lambro is a leading manufacturer of kitchen vents and kitchen vent kits. Typically, vents are used for air intake, air supply, or air exhaust applications. Our products are made from high-quality materials and backed by a limited warranty. On this page you will find not only our stationary fixed louvered vents and our opening/closing (flap) louver vents, but also roof and wall caps. Wall & roof caps are often referred to as wall vents or roof vents.

Lambro sells its kitchen vent products and kitchen vent kits through a network of dealers, distributors, wholesalers and retailers in the United States.

All of our kitchen vent products meet or exceed local and national building codes. If you are a dealer or contractor contact Lambro. We will be happy to help you find the right product for your kitchen vent needs!

If you are a consumer and are installing a kitchen ventilation system, contact your local big box, hardware store or e commerce site today for Lambro kitchen vents and wall or roof vent kits!

To find a Lambro dealer near, please CLICK HERE.

 

Kitchen Vents Wall Roof Caps Illustration

 

Once you have decided upon which type of kitchen exhaust duct you are going to use with your kitchen range hood or exhaust fan, you will need to select and then install a vent cover or wall or roof cap for the air to exit your home / apartment. A vent helps keep debris and animals from entering the ductwork and clogging it. A number of fixed or operable louvers vents or roof or wall caps can provide this functionality. Be sure to choose a vent that fits snugly and is weatherproof. Use caulking to seal exterior openings around the vent.

 

LAMBRO VENTS with Fixed Louvers

Lambro offers a selection of kitchen vents that are available with stationary fixed louvers with a screen for fresh air intake and kitchen vents with opening/closing flaps to exhaust air. They are made with a polypropylene plastic, giving them durability and longevity. The UV inhibitor in the plastic helps prevent premature fading and gives greater stability in all weather conditions.

 

Kitchen Vents Fixed Louvers

 

Our plastic wall vents with fixed louvers are primarily used for air intake. They include fixed louvers and a molded screen to prevent outside elements from entering the vent. Available in white or brown plastic with a 6” diameter and in white in an 8” diameter size. The vent size you select represents the diameter size of the duct to which it will connect.

6″ White Plastic Air Intake Louver Vent – Item #606W
Pack Quantity: 6 / Retail Package Type: Bulk Pack
6″ White Plastic Air Intake Louver Vent – Item #606WTP
Pack Quantity: 5 / Retail Package Type: Bulk Pack
8″ White Plastic Air Intake Louver Vent Stationary
Pack Quantity: 6 / Retail Package Type: Bulk Pack

 

LAMBRO VENTS with Opening/Closing Louvers

Kitchen Vents Opening Closing Louvers

 

Our plastic louvered vents with opening/closing flaps are used for exhaust applications. They include louvers to prevents outside elements from entering the vent. They do not have a molded screen. They are available in white or brown plastic with a 6” diameter and in white in a 7” or 8” diameter size. In addition, Lambro offers a 6″ White Plastic Louvered Vent with an 11″ tail pipe. This Item #361WTP can be used as a replacement for Item # 646, a similar product that was made by Broan Nutone.

Remember that the size vent you select represents the size diameter of the duct to which it will attached.

6″ White Plastic Louvered Vent – Item #361W
Pack Quantity: 12 / Retail Package Type: Bulk Pack
6″ Brown Plastic Louvered Vent
Pack Quantity: 12 / Retail Package Type: Bulk Pack
6″ White Plastic Louvered Vent – Item #361WTP with 11″ Tail Pipe
Pack Quantity: 5 / Retail Package Type: Bulk Pack

Also available in:

7″ White Plastic Louvered Vent
8″ White Plastic Louvered Vent

 

KITCHEN ROOF & WALL CAPS / VENTS

Kitchen Vents Roof Wall Cap Products

A roof or wall cap / vent is an important part of a ducted range hood installation.

 

The roof or wall cap / vent should match the diameter of your ductwork.

Lambro offers kitchen roof and wall caps in plastic with diameters ranging from 6” to 8” and aluminum roof caps that fits ducts up to 10″ round or ducts 3 ¼” x 10″.

Our roof caps are appropriate for range hoods with the following CFM ratings.

· 0-400 CFM: minimum duct size of 4”, recommended duct size of 6”
· 401-600 CFM: minimum duct size of 6”, recommended duct size of 8”
· 601-900 CFM: minimum duct size of 7”, recommended duct size of 8”-10”
· 901-1200 CFM: minimum duct size of 8”, recommended duct size of 10”-12”
· 1200+ CFM: minimum 10” diameter duct, recommended duct size of 12”

 

WALL CAPS / WALL VENTS

Wall caps, frequently referred to as wall vents are one of the most convenient ways to hide the termination holes from exhaust systems in exterior walls. A well-made wall cap will guard against dirt, debris, and animals for many years, yet not interfere with the exterior aesthetics of a home. Regardless of what kind of air exhaust application you have, finish your exhaust system professionally by purchasing a wall cap / wall vent from Lambro.

Lambro’s wall caps are hooded. They are constructed from plastic in white or grey or from aluminum. Most Lambro product pages for their wall caps / vents have both a spec sheet and installation instructions.

 

LAMBRO ALUMINUM 6” TO 8” ROUND WALL CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Back-draft damper helps prevent undesirable air backflow
· Some aluminum wall caps have screens to prevent birds from nesting inside the vent
· Available in sizes from 6” – 8” round

 

Kitchen Vents Wall Cap Aluminum

 

6″ Aluminum Wall Cap – Item #346 No screen
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Aluminum Wall Cap – Item #347S w/ screen
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Aluminum Wall Cap – Item #348S No screen
Pack Quantity:1 / Retail Package Type: Single Pack

 

LAMBRO PLASTIC 6” TO 8” ROUND WALL CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Back-draft damper helps prevent undesirable air backflow
· Have screens to prevent birds from nesting inside the vent
· Available in sizes from 6” – 8” round
· Colors: white or grey

 

Kitchen Vents Wall Cap Plastic

 

EXAMPLE:
6″ Gray Plastic Wall Cap w/ screen
UV inhibitor is used to help prevent the premature fading of vent
Pack Quantity:18 / Package Type: Bulk Pack

 

LAMBRO 3 1/4″ X 10″ WALL CAPS FOR RIGID DUCTWORK:

· The 3 1/4″ X 10″ size is equivalent to a 6″ round.
· Available in aluminum and plastic (white or grey)
· Spec sheet available on product page
· Opening/closing damper prevents outside elements from entering the vent
· Damper is spring loaded to keep damper closed when not in use
· Plastic wall caps have a UV inhibitor is used to help prevent the premature fading of vent

 

Kitchen Vents Wall Cap

 

EXAMPLES:
3 1/4″ X 10″ Aluminum Wall Cap – Item #1060 spec sheet
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Aluminum Wall Cap – Item #106S w/ screen
Pack Quantity:6 / Package Type: Bulk Pack
3 1/4″ X 10″ Gray Plastic Wall Cap – Item #1170G no screen
Pack Quantity:6 / Package Type: Bulk Pack

 

ROOF CAPS / ROOF VENTS

A roof cap, sometimes referred to as a roof vent, is used to cap vertically run ducting. Both roof or wall caps keep dirt, debris, and animals out of your duct. They also help prevents back drafting. Use caulking to seal the exterior opening around the cap for a tight seal.

 

LAMBRO PLASTIC ROOF CAPS:

· For Shingle Roof Installations Only
· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Spec sheets and installation instruction are available on each product page

 

Kitchen Vents Wall Cap Aluminum

 

EXAMPLES:

6″ Black Plastic Roof Cap
Pack Quantity:1 / Retail Package Type: Single Pack
7″ Black Plastic Roof Cap
Pack Quantity:1 / Retail Package Type: Single Pack
8″ Black Plastic Roof Cap
Pack Quantity:1 / Retail Package Type: Single Pack

 

LAMBRO ALUMINUM ROOF CAPS:

· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Spec Sheet available on each product page

 

Kitchen Vents Roof Caps Plastic

 

EXAMPLES:

Aluminum Roof Cap – Item #116
Fits ducts up to 7″ round
Pack Quantity:1 / Retail Package Type: Single Pack

Aluminum Roof Cap – Item #107
Fits ducts up to 10″ round & 3 ¼” x 10″
Pack Quantity:1 / Retail Package Type: Single Pack

 

LAMBRO KITCHEN ROOF KITS

Lambro kitchen vents kits for the wall or roof makes shopping easier by including all the necessary parts for a complete kitchen ventilation system. With our kits there is no need to separately select a duct, vent, clamps, and trim plate.

 

Kitchen Vents Kits Wall Roof

 

7″ Galvanized Wall Vent Kit

· Can be used to vent over-the-range microwaves
· Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
· Opening/closing flaps prevents outside elements from entering the vent
· UV inhibitor is used to help prevent the premature fading of vent
· Pack Quantity: 1 | Package Type: Retail Carton

7″ Galvanized Roof Vent Kit

· For Shingle Roof Installations Only
· Can be used to vent over-the-range microwaves
· Kit connects to 7” round or 3 ¼” x 10” exhaust outlets
· Opening/closing damper prevents outside elements from entering the vent
· Screen prevents birds from nesting inside of vent
· Designed to prevent leaks with proper installation
· Pack Quantity: 1 | Package Type: Retail Carton

 

Since Lambro offers such an extensive product line of kitchen vents and vents kits, distributors, wholesalers and retailers are sure to find the best options for their customers.

Give us a call at (800) 645-2860 or fill out our Contact Us form.