Dryer Vent
The Lambro 4-inch aluminum exhaust hood vent with 11-inch pipe is for venting through the wall. The damper seals the vent opening when the clothes dryer and bath fan are not running because no exhaust air exits the vent. When the appliance operates, the exhaust air pressure pushes the damper open to let the exhaust air escape from the vent.
The exhaust vent is for new and replacement installations over an existing 4-inch opening. It features an opening with a net-free area of 20.5 square inches, allowing for less back pressure.
The vent’s manufacturing material is 26 gauge aluminum for durability and will not rust to maintain longevity.
Make sure to check local building codes before installation.
Product features and benefits:
- Bulk pack
- Features an opening with a net-free area of 20.5 square inches
- For new or replacement vent installations
- Mounts over existing 4-inch openings
- 11-inch pipe for through-the-wall installation
- Designed for maximum airflow
- Opening and closing damper stays closed when not in use
- Made of 26 gauge aluminum for durability and will not rust to maintain longevity
- Recommended for clothes dryer and bath fan exhaust installations
- Installation screws (not included)
NOTE: This item can be used as a replacement for Item # 642 formerly
supplied by Broan Nutone.
Product Contains:
(1) 4-inch aluminum exhaust hood vent – damper – 11-inch pipe
(1) 4 inch white plastic wall trim plate
Do you need a galvanized version for this item?
3440G
Are you interested in purchasing this vent?
Shop Now
